Cleaning Machine for Micropore Aerator

Cleaning Machine for Micropore Aerator

Installation: Piping washing liquid (mainly formic acvid) with a cleaner through a flexible hose connected with an air pipe into the aeration system
Placing: The cleaner can be placed any aera that needed
Running: Because we clean with formic acid, so the temperature should be controlled above 50 ?, in order to avoid condensation
Dosing: The amount of acid and the frequency is decided upon the sewage treatment plant condition after investigation. Normally, cleaning within a day, the dosage should be 1g/aerator. If there is no obvious effect, the dosage can be increased to 3-5 times.
Cleaning Machine for Micropore Aerator